TM-5-3990-263-13-P
PALLET, ADAPTER, BRIDGE, M15
TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)
APRIL 2012
TM-5-3990-263-13-P - Page 55 of 728
OPERATOR MAINTENANCE
LOCATION AND USE OF CONTROLS AND INDICATORS
INTRODUCTION
This work package addresses location and use of controls and indicators used to operate Bridge Adapter Pallet
(BAP) on vehicle. You should know the location and proper use of every control and indicator before operating
vehicle. For further reference see CBT manuals
(WP
0076).
Table
1.
Load Handling System (LHS) Cab Controls and Indicators
JACOBS
CAUTION
TRAILER
AIR SUPLY
2
1
3
Figure 1.
PTO Controls.
Key
Control/Indicator
Function
1
POWER TAKE OFF
(PTO) ENGAGE
SWITCH
When placed in ON position, hydraulic pressure is supplied to operate LHS and
BAP.
2
PTO ENGAGE
INDICATOR
Indicates when PTO switch is in ON position.
3
HIGH IDLE
SWITCH
When placed in ON position, increases trucks idle speed from low to high (1200
rpm) for LHS operation.
TM 5-3990-263-13&P
0004
0004-1
Back to Top
