TM-5-3990-263-13-P
PALLET, ADAPTER, BRIDGE, M15
TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)
APRIL 2012
TM-5-3990-263-13-P - Page 57 of 728
Table
1.
Load Handling System (LHS) Cab Controls and Indicators - Continued
Key
Control/Indicator
Function
6
NO TRANSIT
WHEN LIT
INDICATOR
Lights when hook arm assembly is not in completely stowed position. CBT is
not to be driven except in immediate loading and unloading area as long as
this indicator is lit.
7
JOYSTICK
Used to operate LHS from cab controls. Function being controlled is
determined by LHS MODE SELECT switch.
8
LHS ENGAGED
INDICATOR
Lights when hydraulic pressure is supplied to LHS.
9
OIL WARNING
INDICATOR
Lights when oil temperature exceeds limits.
10
LHS OVER LOAD
INDICATOR
Illuminates whenever main hydraulic relief valve is opened during loading or
unloading. Indicates LHS has reached an overload condition or that hydraulic
system is lifting very near maximum capacity. If LHS is overloaded, light
illuminates and system is automatically blocked out.
14
15
16
11
12
13
Figure 3.
LHS Remote Control Unit.
11
EMERGENCY
STOP Switch
When pushed, shuts down operation of LHS.
12
HIGH IDLE Switch
When placed in ON position, increases vehicle's idle speed from low to high
(1200 rpm) for LHS operation.
TM 5-3990-263-13&P
0004
0004-3
Back to Top
