TM 5-4210-249-13&P-1
0039-1/(2 blank)
DRAFT
0039
OPERATOR MAINTENANCE
GROUND SWEEPS OPERATION
STARTING GROUND SWEEPS
1.
Make sure crew cab roof hatch is closed and secure (WP 0018).
2.
Put TANK TO PUMP switch (1) to on position.
Indicator light (2) will illuminate.
3.
Start water pump engine (WP 0022).
4.
Prime water pump (WP 0023) until pressure registers on pump discharge gauge.
5.
Set pressure governor (WP 0024).
6.
Put GROUND SWEEPS switch (3) to on position.
Indicator light (4) will illuminate.
END OF TASK
STOPPING GROUND SWEEPS
1.
Put GROUND SWEEPS switch (3) to off position.
Indicator light (4) will go out.
2.
Turn OFF water pump engine (WP 0022).
3.
Put TANK TO PUMP switch (1) to off position.
Indicator light (2) will go out.
END OF TASK
END OF WORK PACKAGE
TFFT02228