TM-5-4210-249-13-P-2

TACTICAL FIRE FIGHTING TRUCK (TFF) MODEL M1142

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL WITH REPAIR PARTS AND SPECIAL TOOLS LIST (INCLUDING DEPOT REPAIR PARTS AND SPECIAL TOOLS); PART 2 OF 4

TM-5-4210-249-13-P-2 - Page 1253 of 1452

TM 5-4210-249-13&P-2

0255-31

DRAFT

0255

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

Care must be taken when installing wire on arm and bracket.

Wire is under tension

and must be held until safely repositioned.

Failure to comply may result in injury to

personnel.

NOTE

Install washers as noted prior to removal.

48. Position cable wire (88) through pin (98).

NOTE

Install cable as noted prior to removal.

49. Install cable (96) on bracket (97) with two cushion clips (95), screws (94), four washers (93), two

lockwashers (92), and nuts (91).

50. Install retainer (90) on cable wire (88) and tighten screw (89).

CAUTION

Cable wire must be bent a minimum of 90 degrees.

Failure to comply may allow

retainer to come loose and not allow primer cable to function.

51. Bend cable wire (88).

52. Install line (86) on elbow (87).

53. Install wire (84) on stud (85) with nut (83).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

Adhesives, solvents, and sealing compounds can burn easily, can give off harmful

vapors, and are harmful to skin and clothing.

To avoid injury or death, keep away

from open fire and use in well-ventilated area.

If adhesive, solvent, or sealing

compound gets on skin or clothing, wash immediately with soap and water.

54. Apply electrical sealant on end of wire (84).

WARNING

ICON 72

WARNING

ICON 30, 44, 27