TM-5-4210-249-13-P-2

TACTICAL FIRE FIGHTING TRUCK (TFF) MODEL M1142

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL WITH REPAIR PARTS AND SPECIAL TOOLS LIST (INCLUDING DEPOT REPAIR PARTS AND SPECIAL TOOLS); PART 2 OF 4

TM-5-4210-249-13-P-2 - Page 1255 of 1452

TM 5-4210-249-13&P-2

0255-33

DRAFT

0255

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

Care must be taken when installing wire on arm and bracket.

Wire is under tension

and must be held until safely repositioned.

Failure to comply may result in injury to

personnel.

NOTE

Install washers as noted prior to removal.

62. Position cable wire (52) through pin (62).

NOTE

Install cable as noted prior to removal.

63. Install cable (60) on bracket (61) with two cushion clips (59), screws (58), four washers (57), two

lockwashers (56),and nuts (55).

64. Install retainer (54) on cable wire (52) and tighten screw (53).

CAUTION

Cable wire must be bent a minimum of 90 degrees.

Failure to comply may allow

retainer to come loose and not allow primer cable to function.

65. Bend cable wire (52).

66. Install line (50) on elbow (51).

67. Install hose (48) on elbow (49).

68. Install line (46) on elbow (47).

69. Install wire (44) on stud (45) with nut (43).

WARNING

ICON 72