TM 5-4210-249-13&P-2
0201-5
DRAFT
0201
AIR CONDITIONER/HEATER RELAY MODULE BLOCK REMOVAL
NOTE
•
Tag and mark wires prior to removal to ensure proper installation.
•
Remove cable ties as required.
1.
Loosen 12 screws (1) and remove wires (2) from air conditioner/heater relay module block (3).
2.
Remove two locknuts (4), washers (5), and air conditioner/heater relay module block (3) from control box (6).
Discard locknuts.
3.
Remove three relays (7), (8), and (9) from air conditioner/heater relay module block (3).
END OF TASK
AIR CONDITIONER/HEATER RELAY MODULE BLOCK INSTALLATION
NOTE
Install cable ties as required.
1.
Install three relays (7), (8), and (9) on air conditioner/heater relay module block (3).
2.
Install air conditioner/heater relay module block (3) in control box (6) with two washers (5) and locknuts (4).
3.
Install 12 wires (2) on air conditioner/heater relay module block (3) and tighten 12 screws (1).
END OF TASK
TFFT01793