TM 5-4210-249-13&P-3
0516-2
DRAFT
0516
INSTALLATION
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing.
To avoid injury or death, keep away
from open fire and use in well-ventilated area.
If adhesive, solvent, or sealing
compound gets on skin or clothing, wash immediately with soap and water.
NOTE
•
Both vent windows are installed the same way.
Driver side shown.
•
Vent window should be installed with latch toward the front of vehicle and hinges toward
the rear.
1.
Apply continuous bead of silicone adhesive sealant to sealing surface of vent window (3).
2.
Install vent window (3) on door (4) with 14 screws (2) and locknuts (1).
END OF TASK
FOLLOW-ON MAINTENANCE
Remove wheel chocks (TM 9-2320-347-10)
END OF TASK
END OF WORK PACKAGE
TFFT01405
WARNING
ICON 30, 44, 27