TM 5-4210-249-13&P-3
0519-1
DRAFT
0519
FIELD LEVEL MAINTENANCE
EQUIPMENT (LADDER) RACK REPLACEMENT
INITIAL SETUP:
REMOVAL
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
NOTE
Front and rear equipment (ladder) racks are removed the same way except where noted.
Rear equipment (ladder) rack shown.
1.
Put MASTER SWITCH (1) in ON position.
CAUTION
Equipment (ladder) rack must be raised approximately 3/4 of the way up to allow
compartment door to be opened.
Failure to comply may result in damage to
equipment.
2.
Push LIFT SWITCH (2) up to raise equipment (ladder) rack (3).
3.
Put MASTER SWITCH (1) in OFF position.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
TFFT01338A
Tools and Special Tools
Tool Kit, General Mechanic’s: Automotive
(WP 0622, Item 27)
Materials/Parts
Adhesive, Sealant, Silicone,
RTV (WP 0625, Item 5)
Cleaning Compound, Solvent (WP 0625, Item 12)
Tags, Identification (WP 0625, Item 51)
Lockwasher (4)
Lockwasher (4)
Lockwasher (4)
Materials/Parts (continued)
Lockwasher (2)
Lockwasher (1)
Personnel Required
MOS 63B Wheeled vehicle mechanic (2)
References
TM 9-2320-325-14&P
WP 0615, Fig. 133
Equipment Conditions
Equipment (ladder) rack unstowed (WP 0011)