TM 5-4210-249-13&P-3
0563-1
DRAFT
0563
FIELD LEVEL MAINTENANCE
WIRE ROPE REPLACEMENT
INITIAL SETUP:
REMOVAL
NOTE
Perform Steps (1) through (5) to remove wire rope from driver side main inlet cap.
1.
Remove screw (1), lockwasher (2), washer (3), and clip (4) from pump house panel (5).
Discard lockwasher.
2.
Remove ring (6) and wire rope (7) from cap (8) and vehicle.
3.
Remove clip (4) from S-hook (9).
4.
Remove S-hook (9) from wire rope (7).
5.
Remove two swaging sleeves (10) from wire rope (7).
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
TFFT0148
Tools and Special Tools
Tool Kit, General Mechanic’s: Automotive
(WP 0622, Item 27)
Materials/Parts
Lockwasher (1)
Lockwasher (1)
References
WP 0615, Fig. 50
Equipment Conditions
Engine OFF (TM 9-2320-347-10)
Wheels chocked (TM 9-2320-347-10)