TM 5-4210-249-13&P-3
0452-1
DRAFT
0452
FIELD LEVEL MAINTENANCE
FOAM TANK LEVEL PROBE WIRE HARNESS REPLACEMENT
INITIAL SETUP:
REMOVAL
NOTE
•
Both foam probe wire harnesses are removed the same way.
Foam A probe wire harness
shown.
•
Note routing of foam A probe wire harness prior to removal to ensure proper installation.
•
Note position and remove cable ties, split looms, and cushion clips as required.
1.
Remove four screws (1), washers (2), and cover (3) from hose bed (4).
2.
Disconnect foam probe wire harness connector (5) from foam probe connector (6).
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
TFFT03318
Tools and Special Tools
Tool Kit, General Mechanic’s: Automotive
(WP 0622, Item 27)
Materials/Parts
Tags, Identification (WP 0625, Item 51)
Ties, Cable, Plastic (WP 0625, Item 58)
References
WP 0615, Fig. 51
Equipment Conditions
Hose bed cover opened (WP 0015)
Pump operator’s panel housing
opened (WP 0325)