TM-5-4210-249-13-P-3

TACTICAL FIRE FIGHTING TRUCK (TFF) MODEL M1142

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL WITH REPAIR PARTS AND SPECIAL TOOLS LIST (INCLUDING DEPOT REPAIR PARTS AND SPECIAL TOOLS); PART 3 OF 4

FEBRUARY 2009

TM-5-4210-249-13-P-3 - Page 713 of 1488

TM 5-4210-249-13&P-3

0453-1

DRAFT

0453

FIELD LEVEL MAINTENANCE

INLET, DISCHARGE, AND TANK FILL AND RE-CIRCULATING CONTROL VALVE WIRE HARNESS

REPLACEMENT

INITIAL SETUP:

NOTE

•

No. 1 and No. 2 driver side discharge, tank fill and re-circulating, and driver main inlet

valve power supplies are accessed by opening pump house panel A.

•

No. 3 and No. 4 passenger side discharge and driver side pre-connect B valve power

supplies are accessed by removing pump house panel G.

•

Driver side pre-connect A valve power supply is accessed by removing pump house I,

located on driver side by transmission.

•

Passenger side auxiliary inlet valve power supply is accessed by removing pump house

panel M or pump house access door located below pump house panel J. (Orientation of

valve may vary.)

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

Tools and Special Tools

Tool Kit, General Mechanic’s: Automotive

(WP 0622, Item 27)

Materials/Parts

Ties, Cable, Plastic (WP 0625, Item 58)

References

WP 0615, Fig. 56

Equipment Conditions

Pump house panel A opened (for No. 1 and No. 2

driver side discharge, tank fill and

re-circulating, and driver main inlet valve

power supply wire harnesses (WP 0539)

Equipment Conditions (continued)

Pump house panel G removed (for No. 3 and

No. 4 passenger side discharge valve power

supply wire harnesses (WP 0540)

Pump house panel I removed (for driver side

pre-connect A valve power supply wire

harness) (WP 0540)

Close pump house access door (for passenger

side inlet valve power supply wire harness, if

opened) (WP 0539)

Remove pump house panel M (for passenger side

inlet valve power supply wire harness)

(WP 0540)

Pump operator’s panel housing

opened (WP 0325)