TM 5-4210-249-13&P-3
0459-1
DRAFT
0459
FIELD LEVEL MAINTENANCE
PUMP OPERATOR'S PANEL WIRE HARNESS REPLACEMENT
INITIAL SETUP:
REMOVAL
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
CAUTION
Care must be taken to ensure electronic parts do not come in contact with other
parts of vehicle.
Damage to equipment may result.
NOTE
•
Tag and mark wires prior to removal to ensure proper installation.
•
Note routing of pump operator’s panel wire harness to ensure proper installation.
•
Note position and remove cable ties, split looms, and cushion clips as required.
•
An assistant may be required.
1.
Remove two screws (1), lockwashers (2), wire 2773 (3), and wire 2788 (4) from DRIVER MAIN INLET
PRIMER switch (5).
Discard lockwashers.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
TFFT03283
Tools and Special Tools
Tool Kit, General Mechanic’s: Automotive
(WP 0622, Item 27)
Materials/Parts
Compound, Sealing (WP 0625, Item 17)
Tags, Identification (WP 0625, Item 51)
Ties, Cable, Plastic (WP 0625, Item 58)
Lockwasher (51)
Lockwasher (1)
References
WP 0615, Fig. 96
Equipment Conditions
Crew cab access panels removed (WP 0499)
Pump house panel Q removed (WP 0540)
Passenger side auxiliary inlet and driver side
main inlet bleeder valves removed (WP 0278)