TM 5-4210-249-13&P-4
0575-7
DRAFT
0575
BACK GROUND SWEEPS REMOVAL
1.
Remove four nuts (1), lockwashers (2), two U-bolts (3), hose (4), and elbow (5) from mounting bracket (6).
Discard lockwashers.
2.
Remove hose (7) from elbow (5).
3.
Remove elbow (5) from hose (4).
4.
Remove ground sweeps (8) from hose (4).
5.
Remove two nuts (9), lockwashers (10), four washers (11), two screws (12), and mounting bracket (6) from
rear crossmember (13).
Discard lockwashers.
BACK GROUND SWEEPS INSTALLATION
1.
Install mounting bracket (6) on rear crossmember (13) with two screws (12), four washers (11), two
lockwashers (10), and nuts (9).
TFFT00147