TM 5-5420-202-10
0048
ITEM
NO.
INTERVAL
ITEM TO BE
CHECKED OR
SERVICED
PROCEDURE
EQUIPMENT
NOT READY/
AVAILABLE IF:
49
After
Roadwheels
and Hubs (Right
and Left Sides)
Figure 43.
Roadwheels.
a. Check inner and outer roadwheels for
chunking or separated rubber that would
cause thumping during use.
b. Check for worn mounting holes by looking
for a shiny area around mounting nuts and
washers.
c. Cautiously check hubs for high temperature
differences between hubs.
d. Check inside rim for grease spattering.
Spattering grease indicates a defective seal.
e. Check for missing roadwheels or
compensating idler wheels.
Any hub is
overheated
and cannot be
corrected by
lubrication.
One or more
roadwheels
are missing or
unserviceable.
0048-41
Table 1.
PMCS - Continued