TM-5-5420-202-10

LAUNCHER, M48A5 TANK CHASSIS

OPERATOR'S MANUAL

DECEMBER 2009

TM-5-5420-202-10 - Page 302 of 535

0048

TM 5-5420-202-10

ITEM

NO.

INTERVAL

ITEM TO BE

CHECKED OR

SERVICED

PROCEDURE

EQUIPMENT

NOT READY/

AVAILABLE IF:

37

After

Hydraulic

Reservoir

Fluid and Fluid

Strainer

Figure 34.

Filler Cap Removal.

a. Unscrew reservoir f ller cap. Remove

dipstick and f uid strainer from reservoir

filler neck.

b. Check for and remove any dirt and debris

from f uid strainer. If required, clean fluid

strainer in degreasing solvent and dry by

shaking. Apply FRH oil to fluid

strainer. DO

NOT use OE/HDO. Install fluid strainer.

c. Wipe dip stick and insert into f ller neck.

d. Remove dipstick and check that f uid level

is at or slightly above FULL mark. If f uid is

below FULL mark, add f uid as required.

Refer to WP 0074.

38

After

Engine and

Transmission

Oil Level

(Engine

Running)

a. Check engine and transmission oil levels.

Refer to WP 0074.

0048-34

Table 1.

PMCS - Continued.