TM 5-5420-202-10
0048
ITEM
NO.
INTERVAL
ITEM TO BE
CHECKED OR
SERVICED
PROCEDURE
EQUIPMENT
NOT READY/
AVAILABLE IF:
WARNING
Electrical shock may occur
when slave starting vehicles
if any battery is missing
or damaged or cables are
defective. DO NOT attempt to
slave start vehicle if any battery
is missing or damaged. DO
NOT use defective cables for
slave starting. Failure to comply
may result in personnel injury or
death, or equipment damage.
Figure 61.
Checking Battery Electrolyte
Level.
g. Remove battery caps from f ll holes. Check
that electrolyte covers plates or bottom of
split ring (if equipped).
h. If electrolyte level is low, or if you notice any
defects, notify f eld maintenance.
0048-57
Table 1.
PMCS - Continued.