TM-5-5420-202-10

0061

TM 5-5420-202-10

REMOVAL

WARNING

•Fue

lisvery f ammable and can explode easily. DO NOT work on fuel system when

engine is hot. Fuel can be ignited by a hot engine. Keep fuel away from open f ame

or spark (ignition source). Keep a B-C f re extinguisher within easy reach when working

with fuel or on a fuel system. Failure to comply may result in personnel injury or death, or

equipment damage.

• Clean fuel tank to purge any f ammable liquid or vapors before welding, grinding, or using

any heat-producing device near the fuel tank. Post "NO SMOKING WITHIN 50 FEET"

signs when working with open fuel, fuel lines, or fuel tanks. Failure to comply may result in

personnel injury or death, or equipment damage.

• When refueling, stop vehicle, shut down engine, and apply parking brake. Ensure no open

f ame is near area. DO NOT smoke. Never add fuel with engine running. DO NOT have

driver seated when adding fuel. After fuel is added, securely close reservoir cap. A loose

cap can cause a fuel leak and is a f re hazard. Before starting vehicle, check that no fuel

is spilled on or around vehicle. Fuel and oil are slippery and can cause falls. To avoid

injury, wipe up spilled fuel or oil with rags. Failure to comply may result in personnel injury

or death, or equipment damage.

1. Use wrench to loosen lock screw (Figure 1, Item 2), remove lock pin (Figure 1, Item 1), and lift fuel cover

(Figure 1, Item 3).

Figure 1.

Fuel Cover.

0061-2

TM-5-5420-202-10 - Page 402 of 535