TM-5-5420-202-10

LAUNCHER, M48A5 TANK CHASSIS

OPERATOR'S MANUAL

DECEMBER 2009

TM-5-5420-202-10 - Page 395 of 535

TM 5-5420-202-10

0059

2. Turn fuel f ller cap (Figure 2, Item 1) and remove from fuel f ller neck (Figure 2, Item 3).

NOTE

• During sandy, dusty, or other adverse conditions, cover fuel f ller neck to prevent foreign

matter from entering fuel tanks.

• Tank requires 385 gal. (1457 l) for complete ref ll.

3. Insert hose (Figure 2, Item 2) into fuel f ller neck (Figure 2, Item 3). Allow for fuel expansion by f lling 6 inches

below opening. Remove any spilled fuel immediately. Wipe up spilled fuel or oil with rags.

4. Remove hose (Figure 2, Item 2) from fuel f ller neck (Figure 2, Item 3) and replace fuel f ller cap

(Figure 2, Item 1) on fuel f ller neck.

Figure 2.

Fuel Filler Cap.

5. Lower fuel cover (Figure 3, Item 3) and secure with lock pin (Figure 3, Item 1).

6. Use wrench to tighten lock screw (Figure 3, Item 2).

Figure 3.

Securing Fuel Cover Locking Pin.

END OF TASK

ENDOFWORKPACKAGE

0059-3/4 blank

SERVICE - CONTINUED