TM-5-5420-202-10
LAUNCHER, M48A5 TANK CHASSIS
OPERATOR'S MANUAL
DECEMBER 2009
TM-5-5420-202-10 - Page 414 of 535
0062
TM 5-5420-202-10
INSTALLATION
Transmission Shroud
WARNING
Transmission shroud is 80 lbs (36.3 kg). To prevent injury, two persons are required to lift
shroud. failure to comply may result in personnel injury or death.
CAUTION
Position shroud (Figure 7, Item 5) carefully on vehicle to avoid damage to shroud
seal (Figure 7, Item 4).
1. With help of second technician, grasp shroud lifting handles (Figure 7, Item 3) and install shroud
(Figure 7, Item 5) on vehicle.
NOTE
Narrow end of turnlock fasteners (Figure 7, Item 1) must be rotated 180 degrees to lock.
2. Use 3/4-inch wrench to lock three turnlock fasteners (Figure 7, Item 1) while holding transmission shroud
(Figure 7, Item 5) to angle bracket (Figure 7, Item 7) on both sides of vehicle.
3. Remove plastic covers (Figure 7, Item 2) from exhaust pipes (Figure 7, Item 6).
Figure 7.
Transmission Shroud Installation.
0062-8
Back to Top
