TM-5-5420-202-10

LAUNCHER, M48A5 TANK CHASSIS

OPERATOR'S MANUAL

DECEMBER 2009

  TM-5-5420-202-10 - Page 415 of 535

TM 5-5420-202-10
0062
NOTE
Position both exhaust elbows at a 45-degree angle toward center of vehicle.
4. Position notch at rear of elbow (Figure 8, Item 3) into notch of exhaust pipe (Figure 8, Item 5).
5. Position clamp (Figure 8, Item 4) on bottom of elbow (Figure 8, Item 3) and exhaust pipe (Figure 8, Item 5).
6. Use 7/16-inch wrench to close clamp (Figure 8, Item 4) and tighten nut (Figure 8, Item 6) on clamp
(Figure 8, Item 4).
7. Close rear exhaust doors (Figure 8, Item 2). Use 1-1/8-inch wrench and 3/4-inch socket to install four screw
assemblies (Figure 8, Item 1) in rear exhaust doors.
Figure 8.
Exhaust Pipe Elbow Exploded View.
END OFTASK
ENDOFWORKPACKAGE
0062-9/10 blank
INSTALLATION - CONTINUED
Transmission Shroud - Continued


Back to Top