TM-5-5420-202-20-1

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 1 OF 4

OCTOBER 1985

TM-5-5420-202-20-1 - Page 104 of 1020

TM 5-5420-202-20-1

Preventive Maintenance Checks and Services for M60A1 AVLB Hull-

Item

No.

21

Interval

Semiannual

Location

Item to

Check/Service

Grease Actuated

Track Adjusting

Links (Left and

Right Sides)

- Continued

Continued

Procedure

Not Fully Mission

Capable if:

5. Note pressure on gage when

grease first starts to come out of

pressure relief valve.

6. If gage indicates less than 2150

psi, replace relief valve (page 14-106)

and repeat steps 4 and 5.

7. If gage indicates 2150-2250 psi,

pressure relief valve is serviceable,

proceed to step 8.

WARNING

To avoid personal injury due to high pressure grease, pressure must be

reduced to zero before gage is removed.

8. Pry up and hold pin on pressure

relief valve until grease stops

flowing.

9. Remove gage and install plug.

10. Adjust track tension

(TM 5-5420-202-10).

Change 4 3-31