TM 5-5420-202-20-2
FUEL TANKS (LEFT AND RIGHT) LEVEL GAGE TRANSMITTER REPLACEMENT (Sheet 4 of 4)
6.
7.
8.
9.
Using screwdriver, install five screws and
washers (F) securing transmitter (C) to
fuel tank.
Using slip joint pliers, secure screws (F)
with lockwire (G).
Connect electrical connector (H) to
transmitter (C).
Check fuel gage for proper operation
(TM 5-5420-202-10).
NOTE
Steps 10 thru 12 apply only to the left fuel
10.
11.
12.
13.
14.
gage transmitter.
Place cover (J) in position over
transmitter (C).
Position safety chain
secure cover (J) with
lockwashers (M).
(K) on cover (J) and
three bolts (L) and
Using 1/2 inch socket, tighten three bolts
(L) securing cover (J) to fuel tank.
Check fuel gage for proper operation (TM 5-5420-202-10).
Close top deck grille door (TM 5-5420-202-10).
End of Task
7-144