TM-5-5420-202-20-2

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4

OCTOBER 1985

TM-5-5420-202-20-2 - Page 372 of 734

TM 5-5420-202-20-2

RIGHT FUEL TANK FILLER REPAIR (Sheet 5 of 6)

INSTALLATION:

1.

Install strainer (A) in fuel tank (B).

2.

Install filler neck (C) on fuel tank (B).

3.

Using allen wrench, secure filler

neck (C) to fuel tank (B) using

eight screws (D).

4.

If required, use slip joint pliers

and install lockwire (E) in eight

screws (D).

5.

Using two new gaskets (F) and

(G), assemble seal assembly (H)

and tighten screws (J) finger tight.

6.

Install seal assembly (H) on filler

neck and, while holding filler neck

in position, tighten screws (J)

until gaskets (F) and (G) are compressed

to form tight seal between filler

neck and hull.

Go on to Sheet 6

7-137