TM-5-5420-202-20-2

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4

OCTOBER 1985

TM-5-5420-202-20-2 - Page 366 of 734

CONDENSATE RELIEF VALVE REPLACEMENT (LEFT OR RIGHT) (Sheet 1 of 2)

TM 5-5420-202-20-2

TOOLS:

15/16 in. socket with 1/2 in. drive

1-3/4 in. open end wrench

6 in. ruler

Slip joint pliers

Ratchet with 1/2 in. drive

Flat-tip screwdriver

SUPPLIES:

Dry cleaning solvent (Item 55, Appendix D)

Gloves (Item 69, Appendix D)

Preformed packing

Goggles (Item 70, Appendix D)

Rags (Item 65, Appendix D)

REFERENCE: TM 5-5420-202-10

PRELIMINARY PROCEDURE: Open top deck grille doors (TM 5-5420-202-10)

REMOVAL:

1.

2.

3.

4.

Press down on connector sleeve (A) and

remove plug (B).

Using slip joint pliers, remove chain (C)

from plug (B).

Using 1-3/4 inch wrench, remove pipe

adapter (D) from fuel tank (E). Cover fuel

tank opening (E) with clean rags.

Press and hold down connector sleeve (A).

Using screwdriver, remove retaining ring

(F) by pulling out.

5.

Remove connector sleeve (A), spring

(G), preformed packing (H), and three

ball bearings (J) from pipe adapter (D).

Throw preformed packing (H) away.

Go on to Sheet 2

Change 1

7-131