INSTALLATION:
TM 5-5420-202-20-2
DUST DETECTOR FILTER STRIP AND COVER REPLACEMENT (Sheet 3 of 3)
1.
2.
3.
4.
Install filter tape (A) into retaining strap
(B) and insert into cover (C).
Install new preformed packings (D), (E),
and (F) into cover (C).
Pull out filter strip (A) so it extends about
1/2 inch past edge of cover (C).
Position assembled cover (C) onto turbo-
supercharger compressor housing (G).
5.
6.
7.
8.
Using 1/2 inch wrench, tighten screws (H),
(K), and (M).
9.
Perform operational test (page 10-298.17).
Install screw and washer (H) through chain
fastener (J) and cover (C).
Install screw (K) and new packing with
retainer (L).
Install screw and washer (M).
End of Task
Change 1
7-130.13