TM-5-5420-202-20-2

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4

OCTOBER 1985

TM-5-5420-202-20-2 - Page 355 of 734

TM 5-5420-202-20-2

DUST DETECTOR PRESSURE SWITCH AND BRACKET REPLACEMENT (Sheet 2 of 4)

REMOVAL:

1.

Disconnect electrical connector (A) from

pressure switch (B).

2.

Using one 9/16 inch wrench to hold

adapter (C), use other 9/16 inch wrench

and disconnect hose assembly (D) from

adapter (C).

3.

Using 9/16 inch wrench, remove adapter (C) and preformed packing (E) from pressure

switch (B). Discard preformed packing.

4.

Using one 5/8 inch wrench to hold adapter (F), use other 5/8 inch wrench and disconnect

hose assembly (G) from adapter (F).

5.

Using 5/8 inch wrench, remove adapter (F) and preformed packing (H) from pressure

switch (B). Discard preformed packing.

Go on to Sheet 3

7-130.8

Change 1