TM-5-5420-202-20-2

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4

OCTOBER 1985

TM-5-5420-202-20-2 - Page 345 of 734

TM 5-5420-202-20-2

AIR CLEANER DOOR REPAIR (Sheet 1 of 3)

TOOLS:

9/16 in. combination box and open end wrench

Long round nose pliers

Hammer (or mallet)

Slip joint pliers

SUPPLIES:

Gasket

Cotter pins (3 required)

Goggles (Item 70, Appendix D)

Leather gloves (Item 76, Appendix D)

Loctite adhesive (Item 74, Appendix D

Face shield (Item 77, Appendix D)

REMOVAL:

To prevent screws from pulling out

of box and injuring personnel, a

minimum of 200 pounds must be

placed atop the door before at-

tempting to remove screws.

NOTE

If captive screws are used, they

will only be loosened and not

removed.

1.

2.

3.

4.

5.

6.

Using wrench, remove three screws (A).

Using long round nose pliers, pull three

cotter pins (B) out of three straight pins

(c).

Remove flat washers (D).

Using hammer, tap straight pins (C) free

of door hinges (E).

Using slip joint pliers, pull three straight

pins (C) from door hinges.

Lift door assembly (F) and remove it from

air cleaner housing (G).

Go on to Sheet 2

7-128

Change 1