TM-5-5420-202-20-2

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4

OCTOBER 1985

TM-5-5420-202-20-2 - Page 341 of 734

TM 5-5420-202-20-2

AIR CLEANER (ARMORED) CIRCUIT BREAKER REPLACEMENT (Sheet 1 of 1)

TOOLS: 1/2 in. socket with 1/2 in. drive

Cross-tip screwdriver

Ratchet with 1/2 in. drive

REFERENCE:

TM 5-5420-202-10

NOTE

All air cleaner circuit breakers are

removed and installed the same way.

REMOVAL:

1.

Using socket, remove 10 screws (A) and Iockwashers (B) securing cover (C) to air cleaner.

2.

Using screwdriver, remove

screws

(D) and lockwashers (E) securing circuit breaker (F)

to cover (C).

3.

Remove circuit breaker (F).

4.

Disconnect two electrical leads (G).

INSTALLATION:

1.

Position circuit breaker (F) onto

cover (C).

2.

3.

4.

5.

6.

Install washers (E) and screws (D) to secure

circuit breaker (F) to cover (C). Use cross-

tip screwdriver and tighten screws (D).

Connect two electrical leads (G).

Install cover (C) and secure with 10 screws (A)

and lockwashers (B).

Using socket, tighten screws (A).

Check operation of centrifugal fans

(TM 5-5420-202-10).

End of Task

7-124