TM-5-5420-202-20-2

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4

OCTOBER 1985

TM-5-5420-202-20-2 - Page 347 of 734

TM 5-5420-202-20-2

AIR CLEANER DOOR REPAIR (Sheet 3 of 3)

INSTALLATION:

1.

Lift door assembly (A) into place on air

cleaner housing (B).

2.

Using hammer, tap three straight pins (C)

into three hinges (D).

3.

4.

5.

Install three flat washers (E) onto three

straight pins (C).

Using hammer, tap three new cotter pins

(F) into holes in straight pins (C).

Using hammer, tap cotter pins (F) around

straight pins (C) to secure washers (E) and

pins in place.

6.

Make sure door assembly (A) is in closed

position (lowered).

To prevent screws from pulling out

of box and injuring personnel, a

minimum of 200 pounds must be

placed atop the door before install-

ing screws.

7.

Using wrench, install and tighten three

screws (G) to secure door

air cleaner housing (B).

End of Task

7-130

Change 1