TM 5-5420-202-34
FUEL SHUTOFF CABLE ASSEMBLY REPLACEMENT (Sheet 4 of 13)
NOTE
Clamp (M) is located through subfloor
7.
8.
9.
10.
11.
Using 7/16 inch socket, remove screw
(N) and lockwashers (P) holding clamp
(M). Remove clamp (M).
Using screwdriver, loosen clamp (Q) and
slide it forward on cable assembly (C).
Using hands, pull cable assembly (C)
forward to dislodge grommet (R) from
bulkhead connector (S).
Remove grommet (R) from cable
assembly (C).
Using putty knife, remove bushing (T)
from cable assembly (C). Discard
bushing (T).
Go on to Sheet 5
4-45
Change 5
7-367
TM 5-5420-202-20-2
operator"s seat.