TM-5-5420-202-20-2

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4

OCTOBER 1985

TM-5-5420-202-20-2 - Page 623 of 734

FUEL TANKS (LEFT AND RIGHT) UPPER FRONT MOUNT REPLACEMENT

(Sheet 1 of 6)

PROCEDURE INDEX

PROCEDURE

PAGE

Removal

7-388

Cleaning and Inspection

7-390

Installation

7-391

TOOLS:

9/16 in. deep socket with 1/2 in. drive

9/16 in. wrench

Slip joint pliers

Ratchet with 1/2 in. drive

15/16 in. socket with 1/2 in. drive

Torque wrench with 1/2 in. drive (0-175 lb-ft) (0-237 N m)

15/16 in. combination box and open end wrench

Diagonal pliers

1/2 in. socket with 1/2 in. drive

SUPPLIES:

Dry cleaning solvent (Item 55, Appendix D)

Gloves (Item 69, Appendix D)

Rags (Item 65, Appendix D)

Goggles (Item 70, Appendix D)

Liquid detergent (Item 11, Appendix B)

Sealing Compound (Item 23, Appendix B)

Lockwire (Item 62, Appendix D)

Lockwashers

PRELIMINARY PROCEDURES:

Remove right fuel tank (page 7-333) for right mount replacement

Remove left fuel tank (page 7-348) for left mount replacement

.

REMOVAL:

1.

Remove washer (A) and lockwasher (B)

from threaded end of eye bolt (C).

2.

Using 15/16 inch wrench, remove nut

(D) from eye bolt (C).

Go on to Sheet 2

4-66

Change 2

7-388

Change 5

TM 5-5420-202-20-2