TM-5-5420-202-20-2

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4

OCTOBER 1985

TM-5-5420-202-20-2 - Page 672 of 734

TM 5-5420-202 -20-2

TRANSMISSION SHROUD REPAIR (Sheet 3 of 6)

6.

Using diagonal cutting pliers, remove lockwire (L) from 21 screws (M) on back side of

retainer (N).

7.

Using hammer and chisel, straighten tabs on four key washers (P).

Write down

for use when

NOTE

location of these four key washers

assembling shroud.

NOTE

If desired, a speed wrench may be used to remove

screws (M).

8.

Using 7/16 inch socket, remove 25 screws (M), 21 flat washers (Q), and four key washers

(P) holding retainer (N) to shroud (E).

9.

Remove retainer (N) from shroud (E).

10.

Remove insulation (R) from shroud (E). Use putty knife as necessary.

Go on to Sheet 4

9-11