TM-5-5420-202-20-2

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4

OCTOBER 1985

TM-5-5420-202-20-2 - Page 676 of 734

TRANSMISSION SHROUD SUPPORTS (LEFT OR RIGHT) REPLACEMENT (Sheet 1 of 1)

TOOLS:

Ratchet with 1/2 in. drive

9/16 in. socket with 1/2 in. drive

2 in. extension with 1/2 in. drive

TM 5-5420-202-20-2

PRELIMINARY PROCEDURES:

Remove transmission shroud assembly (page 9-2).

REMOVAL:

1.

Using socket and extension, remove

three screws, washers, and lock-

washers (A) holding (left or right)

support (B) to hull wall.

2.

Remove supports from vehicle.

INSTALLATION:

1.

Position support (B) (left or right) on hull wall and attach supports with three screws,

washers, and lockwashers (A).

2.

Using socket and extension, tighten

three screws, washer, and lockwasher (A).

3.

Install transmission shroud assembly (page 9-6).

End of Task

9-15