TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 278 of 1060

TM 5-5420-202-20-3

TRANSMISSION OIL HIGH TEMPERATURE SWITCH REPLACEMENT (Sheet 2 of 2)

REMOVAL:

1. Place rags under switch.

2. Pull rubber insulated connector (A) from

switch cap (B).

3. Using wrench, remove switch (C) from

transmission.

INSTALLATION:

1. Using sealing compound, lightly coat threads of new switch

2. Using wrench, install new switch (A) into

transmission.

3. Push rubber insulated connector (B) into

switch cap (C).

4. Remove rags from under switch.

5.

6.

7.

Start and run engine.

Observe oil temperature indicator for normal oil temperature (TM 5-

5420-202-10).

Shut down engine (TM 5-5420-202-10).

Install transmission shroud (page 9-6).

End of Task

TA249180

10-239