TM 5-5420-202-20-3
ENGINE WIRING HARNESS (DUST DETECTOR) REPLACEMENT (Sheet 1 of 8)
PROCEDURE INDEX
PROCEDURE
PAGE
Removal
10-298.1
Installation
10-298.4
TOOLS:
1/2 in. combination box and open end wrench
7/16 in. combination box and open end wrench
1/2 in. socket with 1/2 in. drive
7/16 in. socket with 1/2 in. drive.
Ratchet with 1/2 in. drive
5 in. extension with 1/2 in. drive
Slip joint pliers, with plastic jaw inserts
SUPPLIES:
Lockwashers (2 required)
Self-locking nuts (2 required)
Silicone compound (Item 32, Appendix D)
PRELIMINARY PROCEDURES:
Disconnect battery ground straps (page 10-268)
Remove top deck (page 16-21)
Remove transmission shroud (page 9-2)
Remove engine shroud (page 9-30)
Go on to Sheet 2
Change 1
10-298