TM 5-5420-202-20-3
TRACK ASSEMBLY REPLACEMENT (Sheet 7 of 10)
21. Remove rope (D) from around sprocket hub and rear support roller.
22.
23.
24.
25.
26.
With rope still attached to rear of track, pull rope forward over all three support rollers and
compensating idler wheels.
NOTE
Make sure rope goes between groove in support roller and
compensating idler wheels.
Have driver start and idle engine (TM 5-5420-202-10).
Release parking brake (TM 5-5420-202-10).
Shift transmission lever to L (low) (TM 5-5420-202-10).
Have person pulling on rope walk in front of and to one side of vehicle as it moves forward
slowly.
Go on to Sheet 8
TA249612
14-85