TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 925 of 1060

TM 5-5420-202-20-3

STEERING CONTROL CLEVIS AND STUD REPLACEMENT (Sheet 3 of 3)

INSTALLATION:

1.

2.

3.

4.

Using 9/16 inch wrench, install jamnut

(A) and rod end (B) on rod (C).

Using steel tape, measure between center

of hole in rod end (B) and center of

hole in clevis (D).

Using 9/16 inch wrench, turn rod end

(B) to obtain same dimension recorded

at removal.

Using torque wrench and crowfoot adapter,

tighten jamnut (A) against rod end (B)

to a minimum torque of 16-18 lb-in.

(21.7-24.4 N.m).

5.

Aline rod end (B) in link (E).

6.

Using 9/16 inch wrench, install bolt

(F) in link (E).

7.

Aline rod end (G) in clevis (D).

8.

Using 9/16 inch wrench, install bolt

(H) in clevis (D).

9.

Test operation of clevis (D) and rod (C)

linkage (TM 5-5420-202-10).

End of Task

15-18

TA249641