TM-5-5420-202-20-3
M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4
OCTOBER 1985
TM-5-5420-202-20-3 - Page 915 of 1060
TM 5-5420-202-20-3
STEERING CONTROL ROD REPLACEMENT (Sheet 3 of 3)
INSTALLATION:
1.
2.
3.
4.
5.
6.
7.
8.
Using 9/16 inch
Using 9/16 inch
in rod ends (B).
wrench, install jamnuts (A) and rod ends (B) on rod (C).
wrench and steel tape, obtain measurement between centers of holes
Using torque wrench and crowfoot adapter, tighten nuts (A) against rod ends (B) to
a minimum torque of 192 lb-in. (22 N.m).
Position rod end (B) in steering control handle (D).
Using 9/16 inch wrench, install bolt (E) in steering control handle (D).
Position other rod end (B) in lever (F).
Using 9/16 inch wrench, install bolt
(G) in link (F).
Test operation of steering control rod (C) linkage (TM 5-5420-202-10).
End of Task
15-8
TA249631
Back to Top
