TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 914 of 1060

TM 5-5420-202-20-3

STEERING CONTROL ROD REPLACEMENT (Sheet 2 of 3)

REMOVAL:

1.

Using 9/16 inch wrench, remove bolt (A) from steering control handle (B).

2.

Using 9/16 inch wrench, remove bolt (A) from lever (C).

3.

Remove rod (D).

4.

Using steel tape, measure center-to-center distance of holes in rod ends (E).

5.

Using pencil and paper, write down center-to-center distance.

6.

Using 9/16 inch wrench to hold rod ends (E), use another 9/16 inch wrench to loosen

jamnuts (F).

7.

Using 9/16 inch wrench, remove rod ends (E) and jamnuts (F).

G

O

on to Sheet 3

TA249630

15-7