TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 905 of 1060

TM 5-5420-202-20-3

GREASE ACTUATED TRACK ADJUSTING LINK REPAIR (Sheet 3 of 4)

7.

Position adjusting link (A) in vise.

8.

Using hammer and chisel, cut stakes (L) at

three places (both sides) that hold bearing

(M) in eye end of link.

9.

Using bearing driver tool and adjustable

wrench, remove bearing (M) from

adjusting link (A). Throw bearing (M)

away.

INSPECTION:

1.

Inspect all parts removed for cracks,

breaks, crossed or stripped threads, or

missing items.

Replace damaged or

missing parts as necessary.

2.

Inspect adjusting link for cracks,

mechanical damage, or corrosion. Cracks

are not permissible. Turn damaged ad-

justing link in to next higher level

maintenance.

ASSEMBLY:

Using bearing driver tool and adjustable

wrench, install new bearing (A) in

adjusting link (B).

Using hammer and center punch, stake

bearing (A) in adjusting link (B) in three

places (both sides).

Go on to Sheet 4

TA250381

14-108