TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 895 of 1060

TM 5-5420-202-20-3

SHOCK ABSORBER MOUNTING YOKE BUSHING REPLACEMENT (Sheet 4 of 4)

Rear Mounting Yoke Bushing Replacement (Sheet 2 of 2)

INSTALLATION:

1. Position rear bushing (A) on remover and

replacer (B) and aline bushing (A) in

mounting yoke (C).

2. Position handle (D) through mounting yoke

(C) or remover and replacer (B) and, using

hammer, drive bushing (A) into mounting

yoke (C) until flush with surface.

3. Remove handle (D) and remover and

replacer (B).

4. Position forward bushing (E) on remover and

replacer (B) and aline bushing (E) with

mounting yoke (C).

5. Position handle (D) on remover and replacer

(B) and, using hammer, drive bushing (E)

into mounting yoke (C) until flush with

surface.

6. Install shock absorber (page 14-96).

End of Task

14-9.4

Change 4