TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 904 of 1060

TM 5-5420-202-20-3

GREASE ACTUATED TRACK ADJUSTING LINK REPAIR (Sheet 2 of 4)

3.

4.

5.

6.

DISASSEMBLY:

WARNING

Dry cleaning solvent P-D-680 is toxic and

flammable. Wear protective goggles and

gloves and use oniy in a well ventilated

area. Avoid contact with skin, eyes, and

clothes and don’t breathe vapors. Do not

use near open flame or excessive heat. The

flash point is 100”F-I 38°F (38”C-50”C]. If

you become dizzy while using cleaning sol-

vent, get fresh air immediateiy and get

medical aid. If contact with eyes is made,

wash your eyes with water and get medical

aid immediately.

1.

Clean grease actuated adjusting link (A)

with solvent, brush, and rag.

2.

Using 3/4 inch socket, remove collar

locking screw (B).

Using 7/16 inch socket, remove grease fitting (J). Throw fitting (J) away.

Using 7/16 inch socket, remove safety relief valve (K).

Go on to Sheet 3

TA250380

14-107