TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 911 of 1060

TM 5-5420-202-20-3

STEERING CONTROL HANDLE, MOUNT AND SLEEVE REPLACEMENT (Sheet 1 of 2)

TOOLS: 9/16 in. open end wrench

Hammer

1/8 in. drive punch

Slip joint pliers

Snapring pliers

SUPPLIES:

Lockwashers (4 required)

REMOVAL:

QUADRANTS REMOVED

FOR CLARITY

1.

Using wrench, remove bolt (A) from

clevis of handle (B).

2.

Push rod (C) to one side.

3.

Using slip joint pliers, remove cotter

pin (D) from straight pin (E).

4.

Using hammer and punch, remove straight

pin (E) from handle (B).

5.

Remove handle (B) from vehicle.

6.

Using snapring pliers, remove retaining ring (F). Remove sleeve (G) from mount (H).

7.

Using wrench, remove four screws (J) and lockwashers (K). Remove mount (H).

Go on to Sheet 2

TA249627

15-4