TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 887 of 1060

TM 5-5420-02-20-3

SHOCK ABSORBER REPLACEMENT (Sheet 2 of 2)

4.

While one person holds shock absorber (D),

second person, using hammer, drive out

upper grooved pin (F).

5.

Remove shock absorber (D).

INSTALLATION:

1.

With one person holding shock absorber (A),

aline upper eye (B) with hull mounting yoke (C)

and with keyways.

Using fingers, insert upper grooved pin (D) in

position through yoke (C) and eye (B).

Using pliers, install clip (E).

2.

3.

4.

Aline lower shock absorber yoke (F), with

roadwheel support arm (G). Aline keyways

by pushing up or pulling down on yoke.

5.

Using fingers, install lower grooved pin (H)

through shock absorber yoke (J), with cotter pin

hole facing out.

Using pliers, install clip (K).

6.

End of Task

14-94

TA249620