TM-5-5420-202-20-4

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 4 OF 4

OCTOBER 1985

TM-5-5420-202-20-4 - Page 296 of 534

TM 5-5420-202-20-4

SMOKE GRENADE HULL COMPARTMENT WIRING HARNESS ASSEMBLY REPLACEMENT

(Sheet 1 of 11)

PROCEDURE INDEX

PROCEDURE

PAGE

Removal

22-14

Installation

22-17

TOOLS: 7/16 in. socket with 3/8 in. drive

5 in. extension with 3/8 in. drive

Ratchet with 3/8 in. drive

Slip joint pliers, conduit style, with plastic jaw inserts

Flat-tip screwdriver

Socket insert/extract tool

SUPPLIES:

Lockwashers

Gaskets

Silicone lubricating compound (Item 32, Appendix D)

REMOVAL:

WARNING

Make sure there are no smoke

grenades in dischargers. Acciden-

tal firing of grenade could

hurt or kill you.

1.

Set MASTER BATTERY switch (A)

to OFF.

2.

Using pliers, disconnect electrical con-

nector (B) of smoke grenade hull compart-

ment wiring harness (C) from back

side of basket disconnect (D).

3.

Using socket and extension, remove

two top screws (E), lockwashers (F),

and washers (G) securing two harness

bundle straps (H) to hull.

Go on to Sheet 2

TA248794

22-12