TM 5-5420-203-14
c. Assembly of the MLC 70 Bridge -
CONT
(28) Installation of Flag Assembly.
(a) Install the flag assembly (1) on the rear transverse brace (2) using four bolts (3) and four
nuts (4).
(b) Tighten nuts (4).
(c) Repeat steps (a) and (b) for the flag assembly (1) located on opposite side rear transverse
brace.
2-6. DISASSEMBLY OF MLC 70.
Disassembly of the MLC 70 will be done in the reverse order of
assembly (Paragraph 2-5).
2-7. INITIAL ADJUSTMENTS, DAILY CHECKS, AND SELF TEST.
Daily checks are listed in
PMCS (Table 2-2).
2-56 Change 2