TM-5-5420-203-14

BRIDGE, ARMORED VEHICLE LAUNCHED, SCISSORING TYPE CLASS 60 & CLASS 70 ALUMINUM, 60 FOOT SPAN; FOR M48A5 AND M60 LAUNCHER

TECHNICAL MANUAL; OPERATOR’S, UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE

JUNE 1991

  TM-5-5420-203-14 - Page 230 of 298

TM 5-5420-203-14
FAR-SHORE CENTER
TOOLS/EQUIPMENT:
SUPPLIES:
SECTION REPLACEMENT (Sheet 1 of 4)
General Mechanics Tool Box SC5180-90-N26
Lifting Device (8000 Ibs capacity)
Sling, Multiple Leg
None.
EQUIPMENT CONDITIONS:
Cable Beam removed (pg 3-14).
Scissoring Cables and attaching hardware removed (pg 3-20).
Far-Shore Center Section Transverse Braces removed. (pg 3-39)
Quadrant removed (pg 3-43).
Near Shore Ramp Section removed (pg 3-46).
Far-Shore Ramp Section removed (pg 3-48).
PERSONNEL:
Five
REMOVAL
REMOVE FAR-SHORE CENTER SECTIONS (4 AND 7).
a. Remove four retaining pins (1) from four
locking and connecting pins (2). Remove four
locking and connecting pins (2) securing ramp
section (3) to center section (4).
b. Using a lifting device and sling, separate ramp
section (3) from adjoining center section (4)
a distance of about 1 ft.
c. Perform steps b. and c. for opposite ramp.
d.
e.
FRH hydraulic fluid may contain
Tricresyl Phosphate (TCP) which, if
taken internally, can cause paralysis.
Hydraulic fluid may be absorbed
through the skin. If hydraulic fluid gets
on skin, wash with soap and water as
soon as possible.
Disconnect flexible hydraulic line (5) from
separated ramp section (3). Position line (5)
out of harm’s way.
Perform step d. for opposite ramp.
3-64


Back to Top