TM-5-5420-228-24

LAUNCHER HYDRAULICS SYSTEM M48A5/M60A1 TANK CHASSIS, TRANSPORTING: FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL

AUGUST 1985

TM-5-5420-228-24 - Page 697 of 750

TM 5-5420-228-24

GENERAL MAINTENANCE (Sheet 2 of 33)

Inspection and Repair of Cast Parts and Machined Surfaces (Sheet 1 of 2)

SUPPLIES:

Dry cleaning solvent (Item 15, Appendix D)

Rubber gloves (Item 27, Appendix D)

Crocus cloth (Item 5, Appendix D)

1.

Check interior of cast parts and machined

surfaces for scoring, burring, and pitting.

WARNING

Cleaning

agent

specified

is

flammable.

Use only in well

ventilated areas. Keep away from

flames, sparks, or heat.

Do not

smoke

while

using.

Prevent

contact with eyes, mouth, and/or

skin.

Wear rubber gloves when

performing cleaning procedures.

2.

3.

If minor scoring, burring, or pitting

is found, wearing rubber gloves, use

crocus cloth dipped in dry cleaning solvent

to repair surface.

If crocus cloth dipped in dry cleaning solvent does

not get rid of scoring, burring, or pitting,

or if part is excessively scored, worn,

pitted, or burred, throw part away.

Go on to Sheet 2

C-3