TM 5-5420-228-24
GENERAL MAINTENANCE (Sheet 5 of 33)
Inspection and Repair of Splines (Sheet 2 of 2)
5.
Check for chipped teeth (C) and gouging
(D) on face of spline (A).
6.
Using hand file, get rid of sharp edges
or light gouging (D).
7.
Using rag dampened with dry cleaning
solvent, wipe metal chips and metal
dust from spline (A).
NOTE
End of Task
C-6
Do steps
8
and 9 only if spline (A)
will not be used right away,
8.
Using oil, coat spline (A).
9
.
Using protective wrapping (E), wrap
spline (A).
TA251276