TM-5-5420-228-24

LAUNCHER HYDRAULICS SYSTEM M48A5/M60A1 TANK CHASSIS, TRANSPORTING: FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL

AUGUST 1985

TM-5-5420-228-24 - Page 709 of 750

TM 5-5420-228-24

GENERAL MAINTENANCE - Continued

Removal of Studs Broken Below Surface (Sheet 2 of 3)

NOTE

After being drilled, studs broken

below surface may be removed

either by using a spiral tapered

screw extractor or a fluted type.

If a spiral tapered screw extractor

is used, go to step 7. If a fluted

type extractor is used, go to step

10.

7 .

Using tap wrench handle (E) with screw

extractor (F), turn tap wrench handle (E)

counterclockwise to screw extractor (F) into

stud (D).

8.

Keep turning extractor slowly counter-

clockwise unit stud (D) is removed from

threaded hole (G).

9.

Using clean rag, wipe out threaded hole (G)

and surface (H).

Go on to Sheet 3

TA251285

C-15